Category: Nuts

Bushes

---

Bushes play a pivotal role in the steering and suspension set-up of modern vehicles, allowing the suspension parts to move freely, whilst at the same time, absorbing noise, shocks and vibration

Weld Nuts

---

Weld nuts are used in various industries, including automotive, aerospace, construction, and general manufacturing. Weld nuts play a crucial role in the automotive industry, where they are used to assemble body panels, secure components, and fasten crucial parts, such as engine mounts and suspension systems.

Square projection weld nuts, Hex weld nuts, Flange weld nuts, hex-3 projection weld nuts, hex-6 projection weld nuts and Round weld nuts.

Nuts with Thread Adhesives

---

Precoat / Lock tight :- Coating applied to the threaded nuts or bolts (over their whole circumference) in the form of micro encapsulated adhesive, the bonding properties of which are activated by the process of bolting which will prevent the nut loosing.

Tuflok is a nylon powder sprayed on a threaded part. When it is screwed down, the nylon is compressed. The radial tension created by the elastic deformation of the product causes position retention through increased friction.

Use: Chassis and Transmission parts

Check Nut / Lock Nut

---

Check / Lock nuts are used to secure bolts, screws, or other threaded fasteners in place, to prevent them from loosening due to vibration, shock, or other external forces.

Use: To locate bearings onto a shaft

Tappet Cup

---

In an internal combustion engine, a tappet (also called a ‘valve lifter’ or ‘cam follower’) is the component which converts the rotation of the camshaft into vertical motion to open and close an intake or exhaust valve.
Use: I.C. Engines

Nuts with Metallic Washer

---

Nuts with Metallic Washer or “U” lock nuts are special types of fastener designed to achieve a secure fixing. Some suppliers call them self-locking nuts or stiff nuts. They are screwed onto a bolt or threaded rod just like standard nuts, but a Washer will then resist loosening under torque or vibration forces.

Nycote Coated Nuts

---

The NYCOTE coating is a revolutionary masking process in which a white non-conductive 98% pure Teflon® PFA Fluoropolymer powder is applied to fasteners to form a protective coating. The coating prevents the adhesion of electrodeposited paints, primers and coatings. NYCOTE also protects against weld spatter, adds lubricity to fasteners and reduces torque vs. tension scatter.

Self Locking Nut

---

Locking nuts or lock nuts are special types of fastener designed to achieve a secure fixing. Some suppliers call them self-locking nuts or stiff nuts. They are screwed onto a bolt or threaded rod just like standard nuts, but a lock nut will then resist loosening under torque or vibration forces.

Conical Washer Nut

---

Commonly used in automotive.

Primary purpose of spring washers is to provide tension and preload in a joint assembly. This helps to maintain clamping force and prevent loosening or loss of tension due to vibration.

Wheel Nut

---

Wheel nut is a fastener, specifically a nut, used to secure a wheel on a vehicle. Typically, Wheel nuts are found on automobiles Cars, 3 wheelers, trucks and other large vehicles.