PRODUCTS

Bushes

---

Bushes play a pivotal role in the steering and suspension set-up of modern vehicles, allowing the suspension parts to move freely, whilst at the same time, absorbing noise, shocks and vibration

Weld Nuts

---

Weld nuts are used in various industries, including automotive, aerospace, construction, and general manufacturing. Weld nuts play a crucial role in the automotive industry, where they are used to assemble body panels, secure components, and fasten crucial parts, such as engine mounts and suspension systems. Square projection weld nuts, Hex weld nuts, Flange weld nuts, hex-3 projection weld nuts, hex-6 projection weld nuts and Round weld nuts.

Nuts with Thread Adhesives

---

Precoat / Lock tight :- Coating applied to the threaded nuts or bolts (over their whole circumference) in the form of micro encapsulated adhesive, the bonding properties of which are activated by the process of bolting which will prevent the nut loosing. Tuflok is a nylon powder sprayed on a threaded part. When it is screwed down, the nylon is compressed. The radial tension created by the elastic deformation of the product causes position retention through increased friction. Use: Chassis and Transmission parts

Check Nut / Lock Nut

---

Check / Lock nuts are used to secure bolts, screws, or other threaded fasteners in place, to prevent them from loosening due to vibration, shock, or other external forces. Use: To locate bearings onto a shaft

Tappet Cup

---

In an internal combustion engine, a tappet (also called a 'valve lifter' or 'cam follower') is the component which converts the rotation of the camshaft into vertical motion to open and close an intake or exhaust valve. Use: I.C. Engines

Nuts with Metallic Washer

---

Nuts with Metallic Washer or “U” lock nuts are special types of fastener designed to achieve a secure fixing. Some suppliers call them self-locking nuts or stiff nuts. They are screwed onto a bolt or threaded rod just like standard nuts, but a Washer will then resist loosening under torque or vibration forces.

Nycote Coated Nuts

---

The NYCOTE coating is a revolutionary masking process in which a white non-conductive 98% pure Teflon® PFA Fluoropolymer powder is applied to fasteners to form a protective coating. The coating prevents the adhesion of electrodeposited paints, primers and coatings. NYCOTE also protects against weld spatter, adds lubricity to fasteners and reduces torque vs. tension scatter.

Self Locking Nut

---

Locking nuts or lock nuts are special types of fastener designed to achieve a secure fixing. Some suppliers call them self-locking nuts or stiff nuts. They are screwed onto a bolt or threaded rod just like standard nuts, but a lock nut will then resist loosening under torque or vibration forces.

Conical Washer Nut

---

Commonly used in automotive. Primary purpose of spring washers is to provide tension and preload in a joint assembly. This helps to maintain clamping force and prevent loosening or loss of tension due to vibration.

Wheel Nut

---

Wheel nut is a fastener, specifically a nut, used to secure a wheel on a vehicle. Typically, Wheel nuts are found on automobiles Cars, 3 wheelers, trucks and other large vehicles.

External Torx Head Screw

---

A security Torx L-key and fastener with holes for a safety pin to hinder disassembly with an ordinary Torx key. A Torx T8 screw head on a hard disk drive. Torx screws are commonly found on automobiles, motorcycles, bicycle brake systems (disc brakes), hard disk drives, computer systems and consumer electronics

Socket Head Scew

---

A socket head cap screw features a cylindrical head and a hexagonal recess. This specialised drive requires a hex wrench or Allen key to tighten or loosen the screw. Hex socket cap screws have threads along their length and can either be fully or partially threaded, depending on the application

Round Head Socket Shoulder Bolt

---

Much like all other screws, shoulder screws are meant to hold objects together and in a particular position. However, these screws are designed for use in parts which requires a mounting pin, joint, shaft, dowel, pivot, or sliding motion

Round Head Weld Screw

---

Weld Screws are designed to be permanently welded to like materials. Weld Screws are available in low carbon, stainless steel, heat-treated and plated. A variety of threads are available, and most of our weld screws are designed to be welded within confined spaces

Pan Head Socket Screw

---

Pan head screws are threaded fasteners with a similar non-countersunk, mushroom-shaped head. They are commonly used to fasten wooden workpieces. Pan head is one of the most common types of screws. They are known as “pan head screws” because their head resembles a pan

Hex Screw

---

Hexagon head cap screws, also called hex bolts or hex head cap screws, are threaded fasteners with a six-sided head. They are installed with a wrench or a socket. Compared to other fasteners, hex head cap screws provide a larger surface-bearing area for better clamping

Hexalobular Socket Head Screw

---

The hexalobular socket screw drive, known as Torx or star drive, uses a star-shaped recess in the fastener with six rounded points. It's designed to permit increased torque transfer from the driver to the bit compared to other drive systems

Flnx Screw

---

Flangescrews, as the name suggests, are bolts with a flange, or a ridge, at one end. This flange acts like a built-in washer, distributing the load across a wider area and providing a more secure and stable connection. They are widely used in various industries due to their unique design and functionality

Torx Screw

---

Torx is the trademark for a type of screw head, developed by Camcar Textron in 1967. It's characterised by a distinct, 6-point star-shaped pattern and is often called a 'star screw' that requires a 'star screwdriver' with a 'star bit' to tighten and untighten them